I put the Lori's tube on Thursday night and wore it all day Friday. Morning erections were a problem. It came with long spikes and I had only shortened half of them. The remaining long ones poked into the head of my penis when erect. Going to the bathroom provided some relief.
Things were tougher Saturday morning since I could sleep in. Going to the bathroom was only a temporary solution. Erections became agonizing and I had to take the tube off for a while.
I bought new cutting heads for my Dremel and shortened the rest of the spikes. I will have to see how this turned out.
Outside of the spikes, the device is great. It is a tight fit but not uncomfortable. A lot of the time I cant even feel it. When I can, I'm usually feeling two spikes in the testes ring.
One nice thing. The while thing is tight enough that once I get things lined up for peeing, they stay that way. I can use a urinal without any problem. Between the spikes and the general tightness my penis does not move around at all. This makes it more comfortable.
The device is hinged at the front so I don't have to use stocking or other tricks to get into place.
The hinge looked like a weak spot in the design until I looked loser. I could cut through the hinge but it would not do me any good. The hinge is only used when opening and closing the device. When it is locked on, the hinge is not needed at all.
Between the tightness and the spikes, this is about as inescapable a device as I can imagine. The only thing that would make it more secure is a piercing but I doubt that my wife would like me to get a PA. In the meantime, if I lost the security screws I don't know how I'd get loose.
Sunday, June 19, 2011
Thursday, June 16, 2011
A New Chastity Device
I broke down and bought a Lori's tube. I got one of the ready-made ones. The measurements sseemed reasonable. Lori recommended that the spikes be shortened. I agreed but she accidentally sent it before this was done. No problem. I've done a lot of metal working.
It turned out to be a bigger deal than I expected. The steel that they use is really tough. I made it through the first four spikes before running through cutting blades for my Dremel.
For now, that seems to be enough. I tried it on and the longer spikes are not bothering me.
The device I bought includes a PA pin but I'm not sure why. Between the spikes and how tightly I'm packed in, I can't imagine getting out, even without a piercing.
The device is about as secure as is possible. Instead of a lock, it uses an unusual security screw. The opening is tiny and irregular. I don't know how I could open it without the proper wrench. There is no way that I could cut it off without hurting myself. The pins were hard enough and the rest of it is thicker. About the only thing I could do would be to try to grind the head off of the security screw.
Given the price of the device, I am not going to ruin it to get out.
It seems to be comfortable. Time will tell for sure.
It turned out to be a bigger deal than I expected. The steel that they use is really tough. I made it through the first four spikes before running through cutting blades for my Dremel.
For now, that seems to be enough. I tried it on and the longer spikes are not bothering me.
The device I bought includes a PA pin but I'm not sure why. Between the spikes and how tightly I'm packed in, I can't imagine getting out, even without a piercing.
The device is about as secure as is possible. Instead of a lock, it uses an unusual security screw. The opening is tiny and irregular. I don't know how I could open it without the proper wrench. There is no way that I could cut it off without hurting myself. The pins were hard enough and the rest of it is thicker. About the only thing I could do would be to try to grind the head off of the security screw.
Given the price of the device, I am not going to ruin it to get out.
It seems to be comfortable. Time will tell for sure.
Sunday, June 12, 2011
Tying Kim
I'm not sure how many ways I've tied Kimberly Marvel. I've booked her at least a half dozen times with multiple ties per shoot. I can't say enough good things about her. She's a genuinely nice person and a great model (especially if you want someone who can ham it up).
She is not personally excited by bondage but knows how to look good in rope. Because of physical issues, she is planning on cutting way back on the amount of time she spends wearing the ropes but she is a competent rigger and hopes to get some work as the dominant.
She was the first model I tied up. I learned a lot from the experience and from going over the pictures afterwards.
Because of some cancellations, she had a hole in her schedule (and in her finances). I booked her for a couple of hours. I ran across a tutorial on Chinese bondage and had been wanting to try it. Unlike Japanese bondage, almost all of the rope stays behind the model. The most distinctive feature is a spiral wrap around the woman's arms.
I did a basic version of this plus one with extra loops of rope connecting the spiral wraps to the back of the neck. It looked really good. Kim's husband called it "awesome".
I've had her in Japanese box ties before so I avoided that. I did a chair tie and a rope harness with her arms tied to the back.
We were shooting in a hotel room. It was a sunny day with a lot of light coming through the window. I like natural light and this was as good as I have had to work with. The pictures turned out good. All have nice lighting and Kim looked better than ever.
She is not personally excited by bondage but knows how to look good in rope. Because of physical issues, she is planning on cutting way back on the amount of time she spends wearing the ropes but she is a competent rigger and hopes to get some work as the dominant.
She was the first model I tied up. I learned a lot from the experience and from going over the pictures afterwards.
Because of some cancellations, she had a hole in her schedule (and in her finances). I booked her for a couple of hours. I ran across a tutorial on Chinese bondage and had been wanting to try it. Unlike Japanese bondage, almost all of the rope stays behind the model. The most distinctive feature is a spiral wrap around the woman's arms.
I did a basic version of this plus one with extra loops of rope connecting the spiral wraps to the back of the neck. It looked really good. Kim's husband called it "awesome".
I've had her in Japanese box ties before so I avoided that. I did a chair tie and a rope harness with her arms tied to the back.
We were shooting in a hotel room. It was a sunny day with a lot of light coming through the window. I like natural light and this was as good as I have had to work with. The pictures turned out good. All have nice lighting and Kim looked better than ever.
Subscribe to:
Posts (Atom)