Monday, December 14, 2009
Locked up again.
I gave myself around a day and a half to heal and put the cage on again. At first it hurt. The ring burned. I had to apply some Aloe gel a couple of times. I wondered how I had been able to wear it so long before. Then after a couple of hours, everything loosened up and it feels fine now.
Sunday, December 13, 2009
More on the Steel Chastity Cage
I only made it a day before I had to take the cage off. I was developing sores where the cock ring rubbed, especially where the skin was pinched. I'm not discouraged. The same thing happens when I start wearing my CB6000 after a long period out of it. I have to build up to wearing it while my skin toughens up in the right places.
In addition, I helped a friend move which caused much more running than normal.
On the question of pull-out, I would say that it is impossible. The cock ring is so tight that removing it is difficult when I have full access. Trying to get out with the cage still attached would never work.
Before I took it off, I also verified that there is no way to get satisfaction with it on. A really full erection is uncomfortable - more so than a CB3000 or CB6000. It's not painful but it isn't pleasurable, either. Worse, the tight cock ring makes the erection even bigger.
In addition, I helped a friend move which caused much more running than normal.
On the question of pull-out, I would say that it is impossible. The cock ring is so tight that removing it is difficult when I have full access. Trying to get out with the cage still attached would never work.
Before I took it off, I also verified that there is no way to get satisfaction with it on. A really full erection is uncomfortable - more so than a CB3000 or CB6000. It's not painful but it isn't pleasurable, either. Worse, the tight cock ring makes the erection even bigger.
Saturday, December 12, 2009
New chastity device
I just got one of these. I've already gone through the CBxxxx series from the CB2000 through the CB6000. I enjoyed wearing these but they have their limitations. I've had the "ears" on two rings for the CB6000 break and the seam split a few times. Also, after a few days it starts to smell no matter how careful I am.
I looked at several steel devices and settled on this one. I ordered it late Tuesday and had it on Friday.
My first impression was that it was pretty heavy. Once I got it on I didn't notice the weight.
The device is a typical "trapped balls" style. A cock ring goes around both my penis and testicles and a curved penis cage fastens into this. This arrangement is similar to the Curve. The cock ring is solid with a locking post welded on the top. This goes through a tube on top of the cage and a padlock goes through a hole in the end and keeps the cage attached. Two of the wires that make up the cage are extra long and fit into holes in the ring. This acts as a spacer to keep the cage from crushing me and keeps the cage from turning on the pin.
Everything fits together beautifully. The whole device is well-thought-out and well-made. The wires that make the cage look thin but I can't flex them with my hands.
Unlike the CBxxxx series, this only comes with a single ring. If it doesn't fit then you are out of luck.
The ring is pretty small. I had trouble getting into it. Any smaller and I couldn't have gotten my testicles through it. The space between the ring and the cage is also fairly small. Once on, there is no way in the world to get it off without the key short of cutting off the lock.
With the CBxxxx series prior to the CB6000, the ring was round and extended above the cage. This left a hollow space that helped in pull-out. Not this device. The ring and the cage line up. There is no extra space at the top. Between that and the tight ring, I don't think that I could pull out.
Since is it steel, the cock ring has a much smaller diameter than the CBxxxx series. This means that my balls are not sticking out as far.
I had two concerns about the device. One was how visible it would be since it is longer than the CB3000 and CB6000. This is not a problem. The extra weight pulls it down and the curve ends up between my legs. I can wear a thong and it is not noticeable. The lump from the lock is the main giveaway for someone who knows what to look for.
The other concern was urinating. There is a tiny hole at the end. It seemed unlikely that I could line up with that. This turned out not to be a problem. When I pee, it goes between the bars. So far I haven't had any splatter and there is only a drop or so to clean up - if that.
How effective is it? First, like I said, it is inescapable. I can touch myself through the bars but when erect I bulge through it. This makes the skin hyper-sensitive - too sensitive. The tight cock ring also makes it harder to come. Pumping the cage doesn't work either. This moves that tight ring and hurts my balls. It might be possible to have some sort of orgasm in the cage but it would be difficult and there would be a lot of pain involved.
I've only had it on for a day so far so I can't say much about long-term wear. That tiny cock ring might be a problem. It is so small that it causes folds in the skin which burn during morning erections. I'm trying to spread these out. I don't know if I will have other problems with the ring. It's the main thing that I feel when it is on. I barely feel the cage.
I'm hoping that my body will eventually accommodate the ring like a finger does.
I looked at several steel devices and settled on this one. I ordered it late Tuesday and had it on Friday.
My first impression was that it was pretty heavy. Once I got it on I didn't notice the weight.
The device is a typical "trapped balls" style. A cock ring goes around both my penis and testicles and a curved penis cage fastens into this. This arrangement is similar to the Curve. The cock ring is solid with a locking post welded on the top. This goes through a tube on top of the cage and a padlock goes through a hole in the end and keeps the cage attached. Two of the wires that make up the cage are extra long and fit into holes in the ring. This acts as a spacer to keep the cage from crushing me and keeps the cage from turning on the pin.
Everything fits together beautifully. The whole device is well-thought-out and well-made. The wires that make the cage look thin but I can't flex them with my hands.
Unlike the CBxxxx series, this only comes with a single ring. If it doesn't fit then you are out of luck.
The ring is pretty small. I had trouble getting into it. Any smaller and I couldn't have gotten my testicles through it. The space between the ring and the cage is also fairly small. Once on, there is no way in the world to get it off without the key short of cutting off the lock.
With the CBxxxx series prior to the CB6000, the ring was round and extended above the cage. This left a hollow space that helped in pull-out. Not this device. The ring and the cage line up. There is no extra space at the top. Between that and the tight ring, I don't think that I could pull out.
Since is it steel, the cock ring has a much smaller diameter than the CBxxxx series. This means that my balls are not sticking out as far.
I had two concerns about the device. One was how visible it would be since it is longer than the CB3000 and CB6000. This is not a problem. The extra weight pulls it down and the curve ends up between my legs. I can wear a thong and it is not noticeable. The lump from the lock is the main giveaway for someone who knows what to look for.
The other concern was urinating. There is a tiny hole at the end. It seemed unlikely that I could line up with that. This turned out not to be a problem. When I pee, it goes between the bars. So far I haven't had any splatter and there is only a drop or so to clean up - if that.
How effective is it? First, like I said, it is inescapable. I can touch myself through the bars but when erect I bulge through it. This makes the skin hyper-sensitive - too sensitive. The tight cock ring also makes it harder to come. Pumping the cage doesn't work either. This moves that tight ring and hurts my balls. It might be possible to have some sort of orgasm in the cage but it would be difficult and there would be a lot of pain involved.
I've only had it on for a day so far so I can't say much about long-term wear. That tiny cock ring might be a problem. It is so small that it causes folds in the skin which burn during morning erections. I'm trying to spread these out. I don't know if I will have other problems with the ring. It's the main thing that I feel when it is on. I barely feel the cage.
I'm hoping that my body will eventually accommodate the ring like a finger does.
Subscribe to:
Posts (Atom)